The Disio Display thermostat is designed to be used as a single thermostat for several applications.

The Disio Display thermostat was designed as a fan coil controller/thermostat solution and can be configured for a number of 2 pipe and 4 pipe fan coil sequences, however due to the number and flexibility of universal inputs and outputs can also be used for pressure dependent terminal unit applications or control of standalone heaters (baseboard, unit heater, or radiant panels).

The Disio Display thermostat can act as a stand-alone thermostat to control any one of the mentioned applications or can connect over BACnet MS/TP to be controlled from a building management system (BMS).

Disio Setup is required to setup and calibrate this product. Download the free Windows software from www.disio.io/setup 

• 7 Segment Display
• Capacitive touch buttons
• Menu button for basic information
• Gesture Presence Sensing
• 24VAC power terminal blocks for power
• [4] Universal Inputs (configurable)
• [4] Universal Outputs (configurable)
• Temperature Sensing
• USB-C port for Service Tool
• BACnet MS/TP compatible (terminal blocks)
• Switched HOT/COM Jumper