Diffusers Research

HIGH BAY DIFFUSER

With a ceiling height measuring 30 ft., the High Bay Diffuser Test Area features Grilles & Registers and Diffusers products as well as the ability to mock-up custom tall space applications.

 

HIGH BAY DIFFUSER

HIGHLIGHTS

  • Smoke demonstration of a wide range of commercial and industrial diffusers
  • Demonstrate the pattern of various air outlets under heating and cooling conditions in a high ceiling setting
  • Allows for accurate throw measurement of diffusers in a high ceiling installation
  • Custom mock-up capability to simulate specific project requirements
  • Room Size - 37 ft. by 35 ft. with a 30 ft. ceiling

NOZZLE DIFFUSER DEMONSTRATION AREA

 

Showcasing a selection of Price's nozzle and industrial grille products, this 70-foot-long test area allows demonstration and testing of these long throw outlets at various operating conditions.

 

NOZZLE TEST

Highlights

  • Visually demonstrates air pattern of outlets with different pattern adjustments and supply air temperatures
  • Provides a quick comparison of various outlet models operating at real world conditions
  • Allows for accurate lab measurements of long throw outlets
  • Outlets can be mocked up to suit specific project parameters

REVERBERANT CHAMBER 1

This room generates catalog and performance data including AHRI certified ratings for Price's extensive line of Terminal Units and Grilles & Diffusers.

Utilizing cutting-edge Brüel & Kjær sound measuring equipment, this room ensures that Price's Terminal Units and Grilles & Diffusers products continue to set the bar for product performance. Once measured, sound and vibration data is collected using the Brüel & Kjær PULSE LabShop software platform. Mock-up witness tests are often conducted to fulfill specific project requirements, providing test results that are applicable to the actual job site.

REVERBERANT CHAMBER 1

Utilizing cutting-edge Brüel & Kjær sound measuring equipment, this room ensures that Price's Terminal Units and Grilles & Diffusers products continue to set the bar for product performance. Once measured, sound and vibration data is collected using the Brüel & Kjær PULSE LabShop software platform. Mock-up witness tests are often conducted to fulfill specific project requirements, providing test results that are applicable to the actual job site.


Highlights

  • Capable of collecting 500 measurement points in less than 50 seconds of microphone boom rotation
  • Wall, ceiling, and floor are 9 in. cinder block coated with epoxy paint
  • Testing in accordance with AHRI Standards 880 and 260, as well as ANSI/AMCA Standard 300-08, ANSI/AHRI Standard 350, and ANSI/ ASHRAE Standard 70-2006
  • 3 rotating vane anemometers capable of measuring from 50 to 5,000 CFM
  • Room volume - 5,300 ft3

Our Affiliations

Customize test conditions & products in a real-time environment.

Price has a large team of experienced and talented engineers who are consistently working on breakthough ideas.
We are not afraid to move into whole new product categories if we believe we have a contribution to make.

ASHRAE

www.ashrae.org

Founded in 1894, ASHRAE advances human well-being through sustainable technology for the built environment focused on building systems, energy efficiency, indoor air quality, refrigeration and sustainability.

INTERTEK

www.intertek.com

The ETL Mark is proof of product compliance to North American safety standards.

UL

www.ul.com

With more than a century of expertise innovating safety solutions from the public adoption of electricity to new breakthroughs in sustainability, renewable energy and nanotechnology.

Have a question? Contact Product Support